A PVC window only performs well if it is properly manufactured and installed. Kömmerling sets 10 quality checkpoints for its authorized distributors. Here they are, explained so you can check them yourself on site, whether you buy from us or from someone else.
- Maximum dimensions. Each profile has a maximum sash size. If it is exceeded, the window ends up sagging or closing badly over the years.
- Steel reinforcement inside. PVC needs an internal galvanized steel reinforcement in the frame and the sash. How to check: run a magnet along the profile; it should stick all the way around.
- Glazing beads on the inside. Glazing beads are the pieces that hold the glass in place. They must be on the inside of the house, so the glass cannot be removed from outside.
- Drainage and ventilation gasket. In heavy rain and wind some water can get in between the frame and the sash; the drainage holes push it back outside. On wood-effect finishes these vents must be larger.
- Tilt-and-turn always opens inward. A tilt-and-turn opening (the one that tilts at the top) must open inward; otherwise rainwater gets in.
- Quality hardware. On compression openings (tilt-and-turn, casement, parallel tilt-slide…) there must be a locking point at least every 80 cm.
- Glass thickness as contracted. Glass thinner than contracted reduces insulation and security. The thickness can be measured before it is fitted.
- Fixing screws. The window is fixed to the wall with special screws: one within the first 20 cm from each corner and then at most every 70 cm, with the heads covered by caps in the profile color.
- Polyurethane foam and sealing. The gap between the window and the wall is filled with polyurethane foam and finished with neutral-cure silicone. The foam absorbs expansion and provides airtightness and insulation. Without this finish, a good window becomes a poor product.
- Quality certificate. The manufacture of Kömmerling profiles is certified by AENOR. You are entitled to ask for a copy of the certificate.
Why it matters
Many problems with PVC windows (leaks, rubbing sashes, noise getting in) do not come from the profile but from how the window is manufactured and installed. That is why at Ventanas Ideal Península we manufacture and install following these checkpoints and give a written warranty: 10 years on profiles (composition and color deterioration), 2 years on glass and 1 year on manufacturing, installation, hardware and accessories. It does not cover damage caused by third parties, misuse, impacts, scratches, chemicals or modifications made after installation.
More technical information: technical index · KÖMMERLING76 AD Xtrem · PremiLine · glass · 10 quality checkpoints